HP C501 is a power management device that keeps your dash cam continuously running after your engine is turned off. It monitors your vehicle’s battery status and cuts power off to prevent battery discharge. The C501 comes with low voltage pro- tection settings, timer protection, and over current/surge protection.
LOW VOLTAGE PROTECTION
The C501 will monitor your voltage status and cut off the power if the voltage drops below the configured value.
TIMER PROTECTION
Set the amount of time you want to keep your dash cam on by configuring the C501 timer setting.
OVER CURRENT/SURGE PROTECTION
The C501 will detect abnormal over current status and cut off power to prevent any damage to your dash cam device. Additionally, the C501 has a built-in extra fuse box (2A) to have extra protection if anything goes wrong with an incorrect installation or short circuit.
COMPATIBILITY
The C501 is 100% compatible with all HP dash cam products. It is also universally compatible with other dash cams. Please note not all dash cams have a Parking Mode feature.
MULTI INPUT POWER DC 12V/24V
Automatically detects voltage input whether your vehicle is running DC12V or 24V.
Package contents
- Regulator box
- USB cable
- 3-color wires
- Double-sided tape
- User manual
HP C501 ACC Car Battery Adaptor
INPUT INTERFACE
ACC (Red)
GND (Black)
BATT (Yellow)
Cable length (5ft)
OUTPUT INTERFACE
Cigarette Socket Cable length (5ft)
FUSE
NA
INPUT
12V/24V, 1100mA
RATED OUTPUT VOLTAGE
12V/24V
OUTPUT CURRENT
Rated Current 1A, Max 2A
STANDBY CURRENT (LEAKAGE) NA
NA
CUTOFF VOLTAGE SETTING
11.6V - 12.5V (11.6, 11.9, 12.2, 12.5) 23.6V - 24.5V (23.6, 23.9, 24.2, 24.5)
OUTPUT RECOVERY VOLTAGE
NA
OUTPUT CUT-OFF TIMER SETTING
2 hours, 4 hours, 6 hours, 12 hours, 24 hours, Always On
OPERATING TEMPERATURE
-20° ̊ C to 75° ̊ C (-4°F to 167°F)
PROTECTION
Low Voltage Protection
Timer Protection
Over Current/Surge Protection
DIMENSIONS
63.5 x 38 x 25.4mm (2.5 x 1.75 x 1in)
WEIGHT
85g